top of page

Real-Time Separator

(RTS)

Simple, effective real-time two-phase flow separation gives producers a new choice in liquid/gas/air separation. Unlike traditional eliminators, the Real-Time Separator (RTS) delivers live, two-phase separation in a small, compact footprint.
Live Separation
 
In applications where a liquid flow contains entrained gas, the RTS will restructure the flow regime to a stratified flow and then separate the two phases in real time, under full flow conditions.

In a wet gas application, the RTS is able to remove liquid condensates, whether in aerosol form or in slugging, from gas without a disruption or delay in the flow.

MPMS 1inc PS v1-tran.png
Powerful Design
The RTS is designed to handle all varieties of line slugging that can be generated by varying elevations, hydrodynamic slugs, riser-based slugging as well as more predictable pigging slugs.

 

The RTS Series is highly durable as the full-bore design minimizes wear and prevents excessive maintenance.

Multiphase Oil Gas Well Measurement Test Separator MPFM Coriolis

RTS vs Air Eliminator

The Elite Real-Time Flow Separator Series offers a number of benefits over traditional air eliminators.

Multiphase Oil Gas Well Measurement Test Separator MPFM Coriolis Air Eliminator GLCC
Multiphase Oil Gas Well Measurement Test Separator MPFM Coriolis
8" RTS
Wide Range
The modular design allows the RTS to fit a number of conditons and a wide variedy of flow rates, temperatures and pressures.
Whether it is a 1" or a 16" line size, the RTS can scale up or down depending on the need.​

Multipurpose
The RTS Series offers a new class of versatility as it can be used in a wide variety of production applications.
  • Well Testing
  • On/Off Loading
  • Bunkering/Foam Reduction
  • Compressor Scrubber
  • Steam Knockout
  • Condensate Removal

Multiphase Oil Gas Well Measurement Test Separator MPFM Coriolis
4" RTS truck offloading unit
53" x 32" x 36" (HxWxL)
Multiphase Oil Gas Well Measurement Test Separator MPFM Coriolis
1" RTS shown
24"x18"x22" (HxWxL)

Independent Certification

Extensive testing has been conducted on the RTS including independent validation at CEESI, the pre-eminent 3rd party flow testing lab in the U.S. Gas separation results were exceptional: +/-1%.  The CEESI testing included 40 total data points (14 blind) for testing ranges. 

  • Gas: 25,000 - 650,000 SCFD

  • Liquid: 200 - 2,000 BPD

  • GVF: 14% - 84%

CEESI logo.png
nist-logo_5.jpg
"Amazingly accurate liquid flow data."
                       -CEESI Principal Engineer
Specifications (Flow Separator)
"Amazingly accurate liquid flow data." 
-Eric Harmon, CEESI Principal Engineer
Multiphase Oil Gas Well Measurement Test Separator MPFM Coriolis
Notes:

1) Sizing reflects standard offerings; sizing up to 16" is available.

2) Flow rates reflect water; maximum rates can vary depending on viscosity.

3) Built to ASME and customer pressure and temperature specifications.

4) Gas rates may impact sizing listed above.

bottom of page